高光谱成像用高帧频CMOS图像传感器北大核心

针对高帧频、全局曝光和光谱平坦等成像应用需求,设计了一款高光谱成像用CMOS图像传感器。其光敏元采用PN型光电二极管,读出电路采用5T像素结构。采用列读出电路以及高速多通道模拟信号并行读出的设计方案来获得低像素固定图像噪声(FPN)和非均匀性抑制。芯片采用ASMC 0.35μm三层金属两层多晶硅标准CMOS工艺流片,为了抑制光电二极管的光谱干涉效应,后续进行了光谱平坦化VAE特殊工艺,并对器件的光电性能进行了测试评估。电路测试结果符合理论设计预期,成像效果良好,像素具备积分可调和全局快门功能,最终实现的像素规模为512×256,像元尺寸为30μm×30μm,最大满阱电子为400 ke^(-),FPN小于0.2%,动态范围为72 dB,帧频为450 f/s,相邻10 nm波段范围内量子效率相差小于10%,可满足高光谱成像系统对CMOS成像器件的要求。     

Synergistic effect of high-intensity ultrasound and β-cyclodextrin treatments on browning control in apple juice

This work evaluated the synergistic effects of combined high-intensity ultrasound (HIU) with β-cyclodextrin (β-CD) treatments on inhibiting browning of apple juice and explored the mechanism through simulation system. The combined treatment of 300 W HIU with 0.006 g mL⁻¹ β-CD had a synergistic impact on maintaining juice colour, resulting in a 39.06% reduction in browning degree, only a 36.64% decrease in total phenolic content, and a 17.82% reduction in PPO activity. The inhibition of enzymatic browning in simulated system revealed that HIU suppressed the enzyme (Polyphenol oxidase, PPO) and β-CD inhibited enzyme (PPO) and embedded substrate (polyphenol). The results of spectroscopic analysis showed that the particle-size distribution of PPO narrowed, the content of α-helix in the secondary structure increased, the fluorescence intensity increased, and the maximum wavelength was red-shifted after HIU and β-CD treatment. Changes in structure could further result in PPO activity loss. Hence, the combined treatment could synthetically alleviate the browning of apple juice.     

安卓平台上的医用图像信息采集系统的开发设计

为了探讨在安卓平台上构建医用图像采集系统的开发个案,分析通过以智能手机、平板电脑为核心安卓设备通过拍照获得化验单数据后进行文本识别并提交智慧医疗系统的解决方案。本文首先通过二值化算法形成低阈值图像数据,使用卷积神经元网络算法对文本进行逐一识别,使用K-means算法对识别后的单字文本进行字段记录值的整合并形成元数据库服务于其他智慧医疗系统模块。在使用9000组数据对神经元网络进行前期训练的前提下,该系统的识别准确率达到了99.5%以上。本系统具有一定的可行性,对未来智慧医疗的系统开发有实践意义。     

Core–Shell Photoanodes for Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water splitting into hydrogen and oxygen is a promising solution for the conversion and storage of solar energy. Because sluggish water oxidation is the bottleneck of water splitting, the design and preparation of an efficient photoanode is intensively investigated. Currently, all known photoanode materials suffer from at least one of the following drawbacks: ① low carriers separation efficiency; ② sluggish surface water oxidation reaction; ③ poor long-term stability; ④ insufficient water adsorption and gas desorption. Core–shell configurations can endow a photoanode with improved activity and stability by coating an overlayer that plays energetic, catalytic, and/or protective roles. The construction strategy has an important effect on the activity of a core–shell photoanode. Nonetheless, the mechanism for the improvement of performance is still ambiguous and is worthy of a closer examination. In this review, the successes and challenges of core–shell photoanodes for water oxidation, focusing on synthesis strategies as well as functionalities (facilitating carrier separation, surface reaction promotion, corrosion prevention, and bubble detachment) are explored. Finally, the perspectives of this class of materials in terms of new opportunities and efforts are discussed.     

Block size selection in rate-constrained geometry based point cloud compression

Multimedia Tools and Applications - In geometry-based point cloud compression, the geometry information is typically compressed using octree coding. In octree coding, the size of the blocks in the...     

Subdivision based isogeometric analysis for geometric flows

We present a new isogeometric analysis (IGA) approach based on extended Loop subdivision scheme for solving various geometric flows defined on subdivision surfaces. The studied flows include the second-order, fourth-order, and sixth-order geometric flows, such as averaged mean curvature flow, constant mean curvature flow, and minimal mean-curvature-variation flow, which are generally derived by minimizing the associate energy functionals with $L^2$-gradient flow respectively. The geometric flows are discretized by means of subdivision based IGA, where the finite element space is formulated by the limit form of the extended Loop subdivision for different initial control meshes. The basis functions, consisting of quartic box-splines corresponding to each subdivided control mesh, are utilized to represent the geometry exactly. For the cases of the evolution of open surfaces with any shape boundary, high-order continuous boundary conditions derived from the mixed variational forms of the geometric flows should be implemented to be consistent with the isogeometric concept. For time discretization, we adopt an adaptive semi-implicit Euler scheme. By several numerical experiments, we study the convergence behaviors of the proposed approach for solving the geometric flows with high-order boundary conditions. Moreover, the numerical results also show the accuracy and efficiency of the proposed method.